SAGE

Çevre Şartları Test Talebi

Please enable JavaScript in your browser to complete this form.

Firma / Kurum / Kuruluş Bilgileri

Authorized Information

Delivery Information

Result Report / Invoice
Please specify if you want your shipments to a different address. (Please specify if you want the language of the Results Report / Calibration Certificate in English)

Sample / Device Information

Enerjik Malzeme İçeriği
Do you want to add a second sample/device?

Other Information

Please fill in this field according to the sequence number indicated in the "Sample/Device Information" section.

Planned Delivery Date
Requested Completion Date

Testin Adı

Numune Sıra No

Standard

Metot / Kısım

Prosedür

Profile / Category

Diğer Test Parametreleri

Düşük Basınç

High Temperature

Düşük Sıcaklık

Sıcaklık Şoku

Güneş Işınımı

Yağmur

Nem

Salt Fog

Sand and Dust

İvmelendirme

Vibration

Shock

Düşürme

Buzlanma-Dondurucu Yağmur

Freezing and Melting

Gemi Güvertesi Ekipmanları Mekanik Titreşim

Elektrostatik Boşalma (ESB)

Hidrostatik Basınç

Yapısal Bütünlük ve Sızdırmazlık

İstif

Other

Notes

  1. The Sample/Device Name should be written as you would like it to appear on the Results Report or Calibration Certificate.
  2. Tanım ve Açıklamalar kısmında Numune/Cihazın boyutsal ve kütlesel özellikleri, tanımlayıcı kod numarası, kafile/seri numarası, üreticisi, markası, modeli gibi tanımlayıcı bilgileri ve özellikle EHG-5 kodlu hizmetler için ölçüm aralığı bilgisinin verilmesi gerekmektedir. Eğer mümkünse bu bölümde atıf yapılarak söz konusu bilgileri içeren çizim, şartname vb. belgeleri başvuru formuna eklenmelidir. Cihaz/standart/numunelerin saklanması için özel bir koşul gerekliyse bu bilgilerin verilmesi gerekmektedir.
  3. In the absence of a specific request by the customer for the service, calibration/testing is performed according to the relevant standards and the conformity assessment of the results is left to the customer.
  4. In case a conformity assessment for the service is requested, the assessment criteria must be submitted to TÜBİTAK SAGE before the offer is accepted.
  5. Hizmete yönelik uygunluk değerlendirmesi istenmesi durumunda, teklif kabul edilmeden değerlendirme kriterlerinin TÜBİTAK SAGE’ye iletilmesi gerekmektedir. İlgili bilgiler “Açıklamalar” kısmında verilmeli veya bu bölümde atıf yapılarak söz konusu bilgileri içeren doküman başvuru formuna eklenmelidir.
  6. Numuneye yönelik uygunluk değerlendirmesi TÜBİTAK SAGE tarafından gerçekleştirilmemektedir. Bu yönde karar kuralı uygulanmamaktadır.
  7. In order to determine the feasibility, pricing and performance of Environmental Tests (services coded EHG-2), the following information must be provided in the application form or its annex and planning must be made in the light of this information. For more detailed information on environmental test capabilities tubitak.gov.tr can be accessed from the web address.
    • Test standards mostly leave the test duration and boundary conditions to the user. Test times, boundary conditions, test categories and test procedures should be detailed in the application form.
      • Example 1: Conditioning time for high temperature test according to MIL-STD-810G standard (2 hours)conditioning time is/is not dependent on surface temperature measurement (the conditioning period will be started when the test specimen surface temperature reaches the conditioning temperature), the results of the analysis of the penetration time of the temperature into the test specimen (1 hour after the test specimen surface temperature reaches the conditioning temperature)conditioning temperature level (65°±2°C)must be given in the remarks section of the application form.
      • Example 2: Method and category information for vibration testing according to MIL-STD-810F (of the following vibration profile according to Method 514.5 - Vibration, Category 14 - Rotary wing aircraft - helicopter, Figure 514.5C-10)axes and application times of the vibration profile (applied to the test specimen to vibrate in x, y and z axes for 4 hours in each axis) must be given in the remarks section of the application form.
    • A schematic drawing / technical drawing / solid model showing the external dimensions of the test specimen, center of gravity position, weight, connection, transport and lifting interfaces and posture during normal use, test fixture weight, etc. should be attached to the application form.
    • For Vibration, Shock and Acceleration Tests, a fixture design specific to the test specimen that meets the structural requirements is required. The request for the fixture design to be made by TÜBİTAK SAGE or the information that it will be made by you should be specified in the application form. The pre-production technical drawing and structural analysis report regarding the fixture design must be examined by TÜBİTAK SAGE. The suitability of the fixture for the test system is evaluated by TÜBİTAK SAGE in terms of whether it will interfere with the operation of the test system and whether it will pose a risk to the safety of the infrastructure personnel where the test will be carried out. If the test fixture is deemed inappropriate by TÜBİTAK SAGE, the test will not be conducted.
    • TÜBİTAK SAGE is not responsible for the functional control tests of the tested Sample/Device.
  8. This form is for application purposes only. The provision of the requested service is only possible upon the acceptance of the application by TÜBİTAK SAGE. After your application is evaluated by TÜBİTAK SAGE, a price offer will be sent to you by fax.
  9. TÜBİTAK SAGE has determined the conditions for industrial services with the TÜBİTAK SAGE Industrial Service Conditions document and announced it on its website. All applications are evaluated within this scope.

 

Facebook Linkedin X-twitter Youtube Instagram

Scientific and Technological Research Council of Turkey.

© 2025 TÜBİTAK SAGE | All Rights Reserved.

Quick Links

Test Request
Career
News
Main Menu
Follow Us
Facebook Linkedin X-twitter Youtube Instagram

© 2024 TÜBİTAK SAGE | All Rights Reserved.